Retro Sonic pedals

RETRO SONIC PHASER.
The Phaser is based on the classic 4 stage Script circuit with a few additions for a more versatile pedal. Along with the Rate, the Retro-Sonic Phaser has a Depth control which allows you to dial in the intensity of the effect, as well as a level control to match unity gain, or even provide a little boost if desired. All pedals will have a matched set of FETs for the best possible phasing experience, and of course True Bypass is standard.

RETRO SONIC DISTORTION.
The Retro-Sonic Distortion pedal is based on an LM308 op-amp design, and features true bypass switching, with Distortion, Tone and Level controls. Together, these provide a wide range of tonal possibilities, from subtly distorted blues tones through to classic rock and metal.
As added flexibility, Retro-Sonic has incorporated two internal trim pots to allow adjustment to the frequency response of the gain structure. This gives Distortion users the option to tailor the overall response of the pedal to taste, by reducing or increasing the mix of high or low end content. More tonal flexibility can be explored through multiple clipping options via a 3 position mini toggle switch, which selects symmetrical-diode, asymmetrical-diode, or LED clipping.
The Retro-Sonic Distortion is a professional quality effect pedal that recaptures the much sought-after "vintage vibe." It is a truly versatile and musical pedal design that responds to touch, producing a big, natural, harmonically rich tone that works with any guitar-pedal-amp configuration.

RETRO SONIC EIGHT O EIGHT.
The Eight-0-Eight Overdrive is a faithful recreation of the original TS-808 Tube Screamer circuit and features the JRC4558D op-amp. Its overdrive circuit provides the same tone as a vintage '808, noted to provide tube like overdrive effects while retaining the guitars original tone.
Being a ground up build rather than a modified pedal has allowed us to provide some feature benefits up front.
FEATURES:
- The unit is built with metal film resistors and caps for the best fidelity possible.
- The opamp is mounted in a socket so that you can swap engines easily.
- An internal trimpot allows for adjustment to the amount of bottom end content present. The range is from stock TS to nearly flat (no flaby-ness wanted). The mids are not taken away, the bottom is brought up. A nice feature that lets you decide what the right amount of low end is.

These pedals are IN STOCK now. Contact Tym guitars for these or any other pedal in the Retro Sonic range.